RepairWindows

Windows 10 Automatic Repair Loop – Best Fixes to Bring the PC Out of It

Cocospy Phone Spy

The issue of Windows 10 automatic repair loop occurs as a majorly annoying problem in Windows systems where you have to wait for restarting your work till the endless rebooting of the PC stops. However, fixing this issue isn’t a big deal, and you can take the help of the best solutions that we are going to give below.


Issues with the Automatic repair Windows feature

This feature comes in-built into the Windows 10 PCs, and its main function is to monitor the stability of the system continuously and voluntarily. This feature keeps doing its job in the background and doesn’t make any significant appearance. However, it starts giving a major problem when the automatic repair starts happening in a loop, and the PC begins rebooting frantically. Some of the major causes behind it can be:

  • Hardware failure
  • Software errors
  • OS upgrade
  • Program or driver update

These spontaneous issues can be fixed with the methods that we are now going to give you.

Automatic repair

PS: if you wish to know how to activate Windows 10 free and how to fix the There was a problem resetting your PC issue easily, just read more.


Perform a PC reset or refresh to fix ‘Windows 10 Automatic Repair Loop’

The issue of Windows 10 automatic repair loop is not a rare one and is well known to the Microsoft team as being one of the frequently reported issues by many users. To fix that, Microsoft came out with a quick method and fitted the relevant features into the system only. As per the recommended fix for this issue by Microsoft itself, you can refresh the problematic PC in a particular way to get rid of the endless repair loop, and here are the steps for that process:

1. Turn on the power of your PC and see how it responds. If it is still stuck in the repair loop, it will begin to enter the Preparing automatic repair mode, and you will see that screen once again.

Perform a PC reset or refresh

2. Go ahead with shutting down the PC forcefully by pressing down the power button and holding it so three times.

3. You will have to do this reboot process two to three times until you will get access to the boot repair page.

4. On the boot repair screen, hit the option Troubleshoot. On the next screen, you can choose any of the options Reset PC or Refresh PC. We suggest you choose the latter option if you don’t want the files to get removed.

Perform a PC reset or refresh

Besides, let’s learn more about How to reduce background noise on mic on Windows 10 and how to fix the Taskbar Disappeared in Windows 10 issue with ease.


Disable the early launch feature of anti-malware protection to fix ‘Windows 10 Automatic Repair Loop’

If the Windows 10 automatic repair loop reoccurs even after resetting or refreshing the PC, the problem may be lying somewhere else. One possible cause can be the early launch anti-malware protection feature of the system that might be sending your system into repair loops upon falsely detecting any issue. The logical solution is to stop this feature, and it can be done easily from the Command Prompt present in the menu of the Windows boot options page. The menu of Command Prompt appears after restarting the PC several times.

The process of disabling the early launch anti-malware protection feature can be carried out by following these steps:

1. Once the menu screen of Windows Boot Options appears after you are done restarting the PC a few times, hit the option Troubleshoot.

2. On the Troubleshoot page, select the option Advanced Options. Now, click on the option Startup Settings.

Disable the early launch feature of anti-malware protection

3. At this point, the PC will restart once again, and you will reach the window of the Command Prompt.

4. Hit the option of Disable early launch anti-malware protection.

Disable the early launch feature of anti-malware protection

5. At the last point, perform another reboot of the PC and check if the Windows normally start this time.

Also, let’s learn more about how long does system restore take and the best Windows 10 key generator.


Remove any erroneous or corrupt file to fix ‘Windows 10 Automatic Repair Loop’

Corrupted or outdated files also become the reason behind the systems getting stuck in the endless Windows 10 automatic repair loop, and this has been reported by users to have occurred frequently. However, the most common and primary problem that people face before moving towards the fix for this issue is identifying the corrupt file. We are going to give you the steps for both identifying the corrupted file as well as fixing it upon finding:

1. On the menu screen of the Windows Boot Options, hit the option of Troubleshoot.

2. Form the listed options on the Troubleshoot screen; select the Advanced Options followed by clicking on the option of Command Prompt.

Disable the early launch feature of anti-malware protection

3. In the Command dialog box or Windows, you will have to enter the following command line-
C: cd Windows \System32\LogFiles\Srt.SrtTrail.txt

4. Upon entering the above command, if the text code like “c:\Windows\system32\drivers\vsock.sys is corrupt” appears on the screen, you can get sure that there exist corrupted files on your system, and they can be the main culprit behind the repair loop issue.

5. Your next move has to be going to the location mentioned in the error code via the Command Prompt itself and then enter the command ‘del‘ for getting rid of the erroneous file instantly and forever.

Remove any erroneous or corrupt file


Fix the MBR manually to fix ‘Windows 10 Automatic Repair Loop’

The MBR or Master Boot Record is a major part of the PCs that need to function most stably and securely all the time to ensure the proper functioning of many other system features. If they get corrupted, lost, or misconfigured, the Windows 10 automatic repair loop can get triggered anytime. If you find that any fault has occurred in the MBR that has been causing the issue, you can follow the method given below to fix that:

1. Form the listed options on the Troubleshoot screen; select the Advanced Options followed by clicking on the option of Command Prompt.

Disable the early launch feature of anti-malware protection

2. In the Command dialog box or Windows, you will have to enter the following command lines in right succession as given-

  • bootrec.exe /rebuildbcd
  • bootrec.exe /fixmbr
  • bootrec.exe /fixboot

Fix the MBR manually


Reset or restore the system

If you tried out all the methods mentioned above and nothing could help bring out the system from the Windows 10 automatic repair loop, then the last option available for you is to perform the rest of your system or restore it to the factory mode. This involves getting back to the normal boot menu of Windows. You can perform the reset or restore of the system by following the steps given below:

1. Once the menu screen of Windows Boot Options appears after you are done restarting the PC a few times, hit the option Troubleshoot.

2. On the Troubleshoot page, select the option Advanced Options. Now, click on the option System Restore on the next window.

Disable the early launch feature of anti-malware protection

3. You will have to wait for some time before a new Wizard window pops-up on the system screen. This wizard will display some instructions on the screen, and you have to continue following them. Select the right restore point during the process and hit the button Finish for starting the Restore process.

The repair loop will end now in all probability and reboot the PC after that.


Passper WinSenior – Recover password for the Windows systems

In many cases, fixing the Windows 10 automatic repair loop may not be the end of it. Many of the users have reported a grey logging box appearing after they rebooted the PC after the completion of the process of repairing the automatic endless loop problem on their system. We recommend that you take the help of credible third party software for the recovery of passwords in this case, like Passper WinSenior.

The name of this best Windows 7 password reset tool software echoes loud in the world of technology as it boasts of the most advanced and fast functionality when it comes to recovering passwords for different programs. It gives the best results irrespective of the complexity of the password that needs to be recovered. And if you wish to know how to fix Windows 10 PIN not working error or how to factory reset Windows 10 without a password, this tool can help you too.

Let’s see some of the primary features of this amazing software:

  • The results of this tool have always proven to be 100% effective in recovering a vast variety of passwords for Windows programs.
  • The process deployed by this tool involves only three easy steps for recovering the password.
  • The best part of this software that it ensures complete data protection of the system while recovering passwords.
  • It is capable of removing or resetting the passwords as well as creating or deleting an account in a time of merely one second.
  • It can burn the password resetting disk for different types of drives like USB flash drives, DVDs, and CDs.
  • The software will completely compatible with different Windows versions like Vista, XP, 7, 8, 8.1, and 10.

Get Passper WinSenior

Method of operating the Passper WinSenior software

Here are the simple steps that you need to follow for recovering passwords after the Windows 10 automatic repair loop ends through this tool:

1. Get hold of any laptop or PC and insert any blank USB flash drive, DVD, or CD into it. Launch the Passper WinSenior tool on the PC.

2. Once the system recognizes the inserted disk, hit the button Create for beginning the process of making a password reset disk.

Passper WinSenior

3. After the burned disk gets made, eject it out safely.

4. Your burn password reset disk is ready for use and goes ahead with inserting it into the locked system. Some instructions will appear on the screen now, and you have to keep following them one by one. By the end of it, your system will enter the boot menu.

Passper WinSenior

5. On the main interface of the Passper WinSenior, hit the button Reset Windows Password. Choose the right user account that you want to unlock from the list of options that emerge.

Passper WinSenior

6. Hit the button Next, followed by entering the password that you want to set for the next account. Click on the button Reset lastly.

A message will then appear on the screen regarding the successful completion of the password recovery process. Now, tap the option Reboot Computer. Eject the password reset disk from the system and then click the button Reboot Now once again for confirming the PC to enter the reboot mode. Once the reboot is done, turn on the power of the system later. This time, you can log in to the system with the help of the new password that you generated through the above process via the Passper WinSenior tool.


Conclusion on How to Fix ‘Windows 10 Automatic Repair Loop’

When going for the manual recovery methods for ending the Windows 10 automatic repair loop, make sure to follow all the steps rightly for sure results. Third-party software like Passper WinSenior would be the right choice to make for recovering the password of your PC that got damaged during the rebooting process. It ensures automatic result delivery, which is errorless and safe too.

Try Passper WinSenior


Related Articles

Back to top button