RecBoot Doesn’t Work? Here’s What to Do

In general, iPhones offer solid performance. However, even iOS devices may get stuck once in a while due to various reasons. Boot loop after an iOS update, stuck in Apple Logo, etc. are some of those common instances. Whenever your iOS device is stuck, your first attempt must be to fix it using recovery mode. This is when software like RecBoot comes to play. So what can we do if RecBoot Doesn’t Work.

In fact, RecBoot is a widely used freeware among iPhone users. This free tool offers you the option of entering recovery mode with a single click operation. You don’t need to engage in complex manual operation if you have RecBoot with you. Entering and exiting recovery mode is a walk in the park if you use RecBoot. You don’t want to rely on iTunes restore if you have Rebooted. The purpose of this article is to show how RecBoot works and what you can do when it doesn’t work.

Downloading RecBoot for free

In this section of the article, let’s take a look at how to download RecBoot for free. There are plenty of resources to download RecBoot software without costing anything at all. Installation of this tool is pretty simple just like using it. All you need is to select a safe download website. As of today, there are plenty of unreliable websites that comprise malware.

We highly recommend you using a download website like Softonic or CNet to get your RecBoot software. However, you should know that this software does not support Windows 64-bit operating system. From some users’ point of view, it can be a downside.

Once the file is downloaded, you should see it in the form of a Zip file. You should then unzip the file and install it on the computer. At the completion of the installation, you can launch the software. Get your iOS device connected to the same computer now to begin the process.

Now, you will have two options to consider. That is to enter the recovery mode or exit the recovery mode. If you need to enter recovery mode, you should click on “Enter Recovery Mode” once the device is recognized.

On the other hand, if your phone is stuck in recovery mode, you should select “Exit Recovery Mode”.

Well, that’s how to enter or exit recovery mode using RecBoot.

PS: if you are bothered with WhatsApp Not Working on Android or iPhone, click to fix it now.

What if RecBoot doesn’t work?

In general, RecBoot works well in all the computers and supports recovery mode operation in most of the cases. However, just like any other software, even RecBoot tends to stop working. Over the past period, many individuals have experienced some issues of RecBoot functionality. However, just because one software doesn’t work, that is not the end of the world. There are several options to consider if RecBoot doesn’t work as expected.

In this section of the article, we intend to reveal the most sophisticated alternatives to RecBoot.

1. Tenorshare ReiBoot

Many experts suggest Tenoshare Reiboot as one of the best alternatives to the RecBoot app. This specific software comes with various features to impress iOS device users. This app is capable of doing even advanced tasks. With the assistance of this tool, you can easily exit or enter recovery mode of iPhone. More importantly, this specific software performs a one-click operation. It can fix various kinds of issues related to iOS devices. For instance, it can fix the white Apple logo and black screen of death. When fixing the issues related to iOS devices, Reiboot doesn’t cause any data losses.

Get Reiboot for iOS

Once the software is downloaded and installed on your computer, you should connect the troublesome iOS device. If you need to enter the recovery mode, you should wait until the program detects the device. Then, you should click on the option called “Enter Recovery Mode”. Within a moment, your device will enter the recovery mode.

To get your iPhone or other iOS devices out of recovery mode, select “Exit Recovery Mode”. Within a moment, the iOS device will be back to normal.

If the device shows some other issue (like white screen, Apple logo loop, etc.), select “Fix All iOS Stuck”. After selecting “Fix All iOS Stuck”, you should click on the option labeled “Fix Now”. Then, you should follow the onscreen instructions. Such an approach will take your device into DFU or recovery mode.

Once the iOS device you use is detected, you can download the latest firmware that is compatible with it. In general, the firmware package has a file size of 2.5 GB. So, you should wait for some time depending on the speed of the network you are connected to. At the completion of the download, you should click on the option labeled “Start Repair”. This process will begin to recover the system.

With these easy steps, ReiBoot will rectify potential errors in your iOS device and let you use it smoothly.

2. dr.fone – iOS Repair (the best option)

Although both of the above options (RecBoot and Reiboot) are decent tools, dr.fone – iOS Repair tool shows significant effectiveness. This special software is developed by Wondershare (one of the most reliable developers in the industry). With the assistance of this tool, you can repair various issues related to iOS devices.

Repairing your iOS device is a pretty decent task if you use dr.fone – iOS Repair. This tool can fix stuck iPhone when updating iCloud Settings & address issues such as white screen, black screen, recovery mode, etc. More importantly, this tool doesn’t cause any data loss during the process of recovering.

At the completion of the recovery, dr.fone – iOS Repair will get your device an updated OS version. If you have jailbroken your device, this process will return it to a non-jailbroken status. Likewise, if the device is unlocked earlier, you will notice that it will be locked once again.

Here’s how to use dr.fone – iOS Repair

Download dr.fone – iOS Repair and get it installed on your computer.

Get dr.fone – Repair (iOS)

01. Initiate the process

To initiate the process, you should connect the iOS device before everything else. Then, you should open dr.fone and select to proceed with “Repair” located on the main Window. After that, you should connect the iPhone (or iPod touch or iPad) to the same computer. Make sure that you use the original lightning cable to prevent interruptions. Now, wait until the software recognizes your iOS device. Then, click on the option “Start” to proceed. You can now see all the information related to the device. For instance, the software will display options like baseband version, the model of the device, version of the system, etc. Now, you should click on Next to move to the next step.

02. Get your device booted in DFU mode

In certain cases, you will experience that the device doesn’t normally respond to the process. In this case, you will have to put your device in DFU mode.

If you need to know how to put an iOS device in DFU mode, here’s how to do it.

If it is an iPhone 7, iPhone 8 or an iPhone X;
First, you should switch off your phone. Press and hold Volume Down and power button simultaneously. You should hold these buttons for about 10 seconds. Then, leave the power button while holding the Volume Down button. The device will then be put into DFU mode.

If it is another iOS device;
You should power off your phone first. Then, you should press and hold both the Power button and Home button simultaneously for about 10 seconds. You should then release the power button only. But, you should keep holding the Home Button to see the device in DFU mode.

03. Download firmware on your device

To perform a system recovery without any hassle, you should go for a firmware download. To do this, you should select the correct type of the model you use and hit the Download button.

You must know that the firmware of the iOS device is a massive file. It will need some time to be downloaded on your phone. The time it takes may depend on the type of the network you are connected to. If you have a stable network, things would be perfectly OK. However, if you cannot download the firmware as expected, you may try it from Apple’s official site.
04. Resolving issues related to your iOS device

Once the firmware download is completed, you can click on the option called “Fix Now”. At this stage, you can see that the repairing is done and your device is taken back to normal mode.

At the completion of the repairing process, you will be able to see that the respective iOS device restarts. When it restarts, the device will get back to its smooth function. If you don’t see the device restating, try the process once again from the beginning.

Well, that is our article about RecBoot and the best options you can use when RecBoot doesn’t work. You can try any of the options mentioned in this article and see which one resolves the issue effectively.


Related Articles

Back to top button