Whenever your laptop won’t power on, it is completely natural for you to get frustrated. In fact, “laptop will not turn on” is a widespread issue, regardless of the brand. It can occur due to several reasons. You just wake up in the morning only to find out that your laptop won’t turn on. Even if you press the power button repeatedly, nothing favorable will happen. But don’t worry – we will tell you how to fix this issue in this guide.
It is obviously frustrating to see when your laptop won’t turn on even if it is fully charged. Also, things can be even annoying when you understand that there was nothing wrong with the laptop earlier. You completed the work for yesterday, shut it down, and everything was fine until then. So, it is entirely natural for any person to get really upset when they see their laptop isn’t working. If you are prepared to follow the methods mentioned in this guide, however, you can easily resolve it. As mentioned before, there are several reasons for this issue. So, continue reading this article and learn how to fix it.
01. Check the power cord if your laptop won’t power on
One of the simplest and most common solutions you can try is checking the power cord of the laptop. In fact, there can be something that drains the power of your laptop when you are away. So, check the power cord of the laptop and see if it has any damages. Be sure to check along the lines for potential breaks, bursts, bruises, or cuts in the cord. Such damages can be a reason to disrupt the regular flow of electricity to the laptop.
Check if you can see damage in the AC transformer box. Also, check if you can feel any burning smell or discolored areas. If so, you will have to replace the cord. Apart from that, you will also have to replace the extension cord if it is damaged. No matter whether the cord or the AC transformer box is damaged, just unplug it from the wall. Then, you should unplug it from the laptop as well. This should be done before replacing it.
02. Check your laptop screen if your laptop will not turn on
If your laptop will not turn on, the next option is to check the screen. On some laptops, the screen may fail to display anything even if the laptop is running without trouble. In such a situation, you might think that the laptop is not working just because the screen is malfunctioning. So, you should check if the screen is working and if there is an issue, just troubleshoot it. Mentioned below are the instructions you should follow if there is something wrong with the screen.
First, you should start it by disconnecting the external display devices that are already connected to the laptop. This is required in order to ensure that they don’t interfere with the normal startup process. If you have connected a projector, specifically, remove it at once. In addition to that, USB devices should also be removed.
If the power button of the laptop works, you will be able to hear the regular startup noises. For instance, you can hear the sound of the fan. If you can hear that, turn off all the lights in the room to make the surrounding darker. Then, check if you can see at least a faint image on the laptop screen. If you can see such fainted graphics, the problem might be related to the screen inverter. It has failed to respond, and the only solution is to replace it. Also, it can occur due to a broken screen brightness button too. In that case, you should get it fixed by a qualified technician.
What if the laptop turns on, but there is no image at all on the screen? If that is the case, the screen of the laptop might be broken and should be replaced. However, if your laptop is an older one, you should consider getting a new one instead of repairing it.
Besides, if you are experiencing the There was a problem resetting your PC issue, click to fix it easily now.
03. Remove the battery and put it back again if your laptop won’t turn on
In certain cases, your laptop can go into a power state and fail to reboot. This is a pretty common instance with many users. If that is the case, you should completely disconnect the laptop from the power source and reconnect it. So, first, you should disconnect the power cable. After that, you should remove the battery as well. However, this method doesn’t work with laptops that have built-in batteries. Be sure to leave the battery disconnected for about two minutes. Then, you should put the battery in the battery slot once again and plug it into the power source. After that, you should check if you can turn the laptop on.
Also, let’s figure out how to screenshot on HP and how to reset the password on HP laptop without disk easily.
04. Remove the devices connected to the laptop
As of today, we use a variety of peripheral devices with our laptops to accomplish different tasks. If you have several devices connected to your laptop and your laptop won’t turn on, here’s what to do. Just remove all those devices from your laptop. This could be memory cards, USB memory sticks, and anything else. It is better to unplug even the mouse (if you have a USB mouse attached to the laptop). If there is something wrong with the peripherals you have connected, that can prevent your laptop from booting properly. So, if the issue is with the peripherals, you can expect the laptop to boot properly after removing them. Sometimes, the laptop can get stuck if its BIOS detects removable storage as the main disk. So, removing all the devices is a pretty handy solution.
05. Check if the laptop is overheated
Many of the laptops comprise an internal thermal regulator. This thermal regulator is supposed to shut down the computer whenever it gets overheated. Because of the same feature, your laptop won’t power on unless it is cooled down properly. In fact, laptops get overheated quite often when the vents of it are blocked. If you use the laptop on a cushion, blanket, bed, or a pillow, for instance, vents can be blocked. As a result, the temperature inside the laptop will increase significantly. So, you should make sure that the laptop is overheated or not.
Sometimes, the overheating issue can trigger due to a faulty cooling fan as well. When the fan has stopped working or working slower than expected, the temperature can increase gradually. Laptops with faulty fans can be identified easily as they are hot to touch. So, if your laptop is hot to touch, just leave it alone for about one hour. When it is cool to touch, you can turn it on. If it works this time, the problem is definitely related to the temperature of the laptop.
06. Make use of Rescue Disc feature
Have you removed all those devices from the laptop? And, you don’t see any error message on the laptop’s screen? If so, you will have to try the rescue disc option. Well, to do this, you should get the Windows DVD. You can use this DVD or even download a rescue disc image. To do this, however, you should use a different computer. Then, you will have to burn the same into a DVD or mount it to a USB.
Do you think that your laptop will not turn on because of a virus-related issue? If so, you’ll have to use a rescue disk from a reputed vendor who is known for antivirus products.
07. Boot your laptop into safe mode
It is another practical solution to boot your laptop into safe mode. Even when the laptop won’t power on, you can boot it on safe mode. If the laptop’s OS cannot load the essential configurations twice in a row, you can see Windows RE. This means the Windows Recovery Environment. This Recovery Environment will help you enter the safe mode. However, if Windows RE doesn’t appear, you should press the power button and hold it. That will “force shutdown” the laptop. You should do this three consecutive times. When you are in Windows RE, be sure to follow the steps mentioned below and enter the “Safe Mode.”
01. To begin with, you should choose the option called “Troubleshoot” from its main screen.
02. Now, click on the option called “Advanced Options.”
03. After that, you should click on “Startup Settings.”
04. Then, click on the option called “Restart” button, which is located on the next screen.
This will boot the laptop in safe mode. It is also possible to choose the option called “Enable Safe Mode with Networking” as well. That will enable the internet on your laptop. Or, you can choose “Enable Safe Mode with Command Prompt.” That is required specifically if you intend to use CMD in the next step.
08. Check if there is a hardware issue
As a last resort, you should check all the hardware components of the laptop. This is necessary, particularly if you have tried all of the above methods but had no luck. You should mainly focus on hardware components such as the RAM kit. In fact, the RAM can cause various issues on the laptop due to malfunction, loose connection, etc. If it is not fixed properly, your laptop will not turn on. So, the best approach is to remove all the hardware components. Then, you should try rebooting the computer.
In addition to that, you should know that some of the hardware components fail permanently. For instance, you cannot necessarily fix a RAM that has become dead. In that case, you must replace it.
Do you hear a pretty strange click noise inside the laptop when you switch it off or on? If that is the case, one of the hardware components (such as the hard drive) might have broken. There is no easy method to fix such an issue by yourself. In that case, all you should do is to take the laptop to a qualified technician. Basically, you should not open the casing of the laptop unless you know how to do it. Also, the damages that may cause when you try to open the laptop casing will void the warranty. That is exactly why we expect you to take the laptop to a professionally qualified expert.
The issues such as “laptop won’t power on” will arise without any prior notice. In that case, your data becomes inaccessible. So, as a smart laptop user, you are supposed to create backups of your laptop data regularly. Those backups should be kept on an external device (external hard drive, DVD, Cloud, etc.). Do you want to know how to fix other issues related to your laptop? Just let us know, and we will answer your queries in future articles.