How to Fix the ‘iPhone Could Not Be Updated Error 14’ Easily

Cocospy Phone Spy

No matter how useful the iTunes app is for upgrading or restoring the iOS devices, there are all chances that you may have to face the iPhone could not be updated error 14 during the process. You must have panicked in the first instance, but you shouldn’t worry for long. We have got you covered with the best solutions for this issue that we are going to discuss in this article.

1. About the iPhone could not be updated error 14

This error occurs while one tries to update or restore the iOS versions with the iTunes app. It also referred to as the iTunes error 14. The following are generally attributed to be the reasons behind this error:

  • A faulty USB cable
  • Erroneous firmware update
  • An outdated version of iTunes
  • Unstable network connection
  • Corrupted IPSW file
  • Storage insufficiency

PS: if you are facing issues like iPhone Update Error 4000 or iTunes keeps asking for password, here are the best solutions for you.

2. The ultimate fix to the iPhone error 14 – Dr.Fone System Repair (iOS)

Trying a lot of methods separately for solving the issue can cost a lot of energy, time, and worst data loss. All the software issues that might be leading to the iPhone error can be handled easily and in one-go by a third-party application that we are going to discuss below.

Dr.Fone System Repair (iOS)

Dr.Fone System Repair (iOS) is a great application that is going to be your best bet to deal with the iPhone could not be updated error 14. It scans the entire software of the iPhone for any problem that might have occurred and does the right fixing for it. The best part is that it does all of that without posing any harm to the device data.

Get Dr.Fone System Repair (iOS)

Here is how to operate the application:

1. Download the application on any PC and then open it. Click over the button of System Repair at the main menu.

2. Connect the problematic iPhone to that PC with any lightning cable. Now hit the option of Standard Mode that will start the process of fixing the error 14.

3. The model of your iPhone will be detected by the app first, followed by the latest firmware meant for it that needs to be downloaded later. Hit on the button Start and then wait as the process will take some time to finish.

4. Once the downloading of the firmware ends, the app will instantly begin to scan the device and then repair it. After all of that is done, a notification will emerge on the main screen of the app. The entire process will not take more than ten minutes, and your phone will get updated.

Dr.Fone – iTunes repair

This is another version of the Dr.Fone application that aims to treat the damage in the inner modules of iTunes. Since the iPhone could not be updated error 14 emerges mostly during updating or restoring the iPhone, fixing the iTunes errors can be the most viable option. Dr.Fone – iTunes repair gives the ultimate diagnostic and repair solutions in this regard, and it has some features like:

  • It removes a lot of errors related to iTunes like error 9, 21, 4031, 4105, and many others.
  • It also helps in resolving the issues that lead to the failure of syncing of iPhone/ iPod touch/ iPad and iTunes.
  • Repair the iTunes issues and restores its normal state in just two-three minutes.
  • It doesn’t cause any risk to the device data in the process of fixing the iTunes errors.

Get Dr.Fone – iTunes repair

Here is how to operate the application:

1. Download the application on any PC and then open it. Click over the button of System Repair at the main menu.

2. Click on the tab iTunes Repair and then select the option of Repair iTunes errors from the list. The application will instantly begin checking the iTunes components and repair them thereby.

3. After the repair is done and you see the error 14 occurring still, then go back to the app and click the button Advanced Repair that will give an enhanced fundamental fixing of the issues.

4. If the error persists even then, you can try clicking the option of Repair iTunes Connection issues for fixing the connection related issues in iTunes.

Besides, let’s figure out how to fix update unavailable with this Apple ID and iPhone Error 4013 with ease.

3. Diagnose the connectors and USB cables

This is essentially the first method to try before going deeper into fixing the iPhone could not be updated error 14. You need to check that all the UB cables attached to the phone are working fine as anything wrong with them can cause the error.

1. Use the original USB cable of Apple. Look for the specific ‘Made for‘ logos to ensure authenticity.

2. Use any other Apple cable.

3. Insert the cable in any other device and check if it is working.

4. Insert the cable in another USB port.

5. Insert the cable directly into the PC and not the USB port of the keyboard.

4. Update the OS and iTunes to Fix the ‘iPhone Could Not Be Updated Error 14’

There can be two possible reasons for this error related to iTunes- outdated OS or outdated iTunes app version.

Both of these issues can be easily fixed by updating them. Launch the Apple store and click on the option of Update. This will display all the software updates that have been launched recently and are available for download. You will then be able to know if the OS is outdated or the iTunes app. If no latest update is shown here, then you are using the right OS and iTunes app, and the problem is something else.

5. Fixing the IPSW file of iTunes

The IPSW file is used by iTunes to update or restore the iOS devices. Any fault in these files can lead to a total crash of the iOS device, and the iPhone could not be updated error 14 would inevitably emerge. This issue can potentially be fixed by renaming or deleting the IPSW file.

Finding the IPSW file

The first step towards the above fix is to find the IPSW file. Different devices have them stored at different locations, and we are going to tell you where.

iOS devices

iPhone/ iPad/ iPod touch: Open the library on the device. Click on iTunes. Here you will find an option named software updates. That is the IPSW file folder.

You can find the location of the IPSW file with another method that uses the Finder:

1. Click over the option of Finder on the dock and then press down the key Option.

2. In the top menu, hit the option Go.

3. Select Library.

4. Open the folder of the Library’s iTunes.

5. Here you will find a folder named Software updates with the device type name. That’s it.

Windows OS

Finding the IPSW file on a Windows device takes into consideration the iOS hardware, username, and Windows version being used by you. Open the Windows File Explorer and then enter .ipsw in the search bar. Ensure to check the entire PC. Once you find the file, delete them.

If you have many user accounts, then you can find the IPSW file in the User directory.

Windows XP: Open C: drive and select Documents and Settings. Select Application, and then click Apple Computer. In the folder iTunes, you will find the IPSW file.

Windows 7, 8, 10, and Vista: Open C: drive and select users. Select AppData and then click Roaming. In the Apple Computer folder, click iTunes, and it is here that you will find the IPSW file.

Fixing the IPSW file

  1. Close the iTunes app.
  2. Open it once again now.
  3. Go to the location of the IPSW file and then delete it. Cross-check if the file is deleted or not by going to the same location once again.

Now try updating or restoring the iPhone. The iPhone could not be updated error 14 wouldn’t appear this time most probably.

Select the IPSW file manually

If the above method of deleting the IPSW file didn’t work, then you can try selecting the particular IPSW file manually that you want to be used by iTunes. Here is how to do it:

  1. Press down the key Option in Mac devices. Press down the key Shift in Windows devices.
  2. Now press the button of Restore.
  3. Click on the particular IPSW file that you wish to install.

Getting the IPSW file for iOS devices

Apple launches the IPSW files for iTunes and then can be easily downloaded from any reliable source. Here is how to do it:

  1. Download the right iOS version for your iOS device. Ensure that the IPSW is the Apple signed version.
  2. Launch the iTunes app.
  3. Connect the iOS device with iTunes.
  4. The recovery message will appear with the options of Update and Restore.
  5. Press down the key Options and simultaneously click on the button Update.
  6. Find the downloaded IPSW file and click on it.
  7. Wait till the iOS device restores to the latest iOS version on it.

6. Hard resetting the iPhone to Fix the ‘iPhone Could Not Be Updated Error 14’

This can be the last option to try for fixing the iPhone could not be updated error 14. However, the method involves data loss, and you must backup all the important data beforehand. Let’s see how to do it:

1. Press the buttons of sleep and home at the same time and keep them held for about 10 seconds. The screen will go all black, and the phone will restart.

2. Keep the buttons pressed until the logo of Apple emerges on the phone’s screen and then release them. Wait till the logo disappears from the screen.

3. The phone will reset itself automatically now, and all you need to do after that is enter the passcode.

7. Use the warranty of your iPhone to fix ‘iPhone Could Not Be Updated Error 14’

If even the hard reset wasn’t able to fix your phone, then there is nothing else that you can try from your end to fix the phone. All the iPhones come with a warranty period of one year. So if it hasn’t been more than a year for your iPhone, then simply take it to the Apple Store and get it exchanged for a new model.

Conclusion on How to Fix ‘iPhone Could Not Be Updated Error 14’

So this was all about fixing the iTunes error 14. Dr.Fone is designed by the tech company Wondershare and is a reliable and trustworthy application that will fix iPhone could not be updated error 14 in a jiffy. While we recommend this app, you may want to try out other methods too, and we assure you that they won’t be disappointing at all. Do share with us if the methods worked out for you.

Related Articles

Back to top button