Does anyone know how to get water out of the charging port? By mistake, I spilled some water on it, and I immediately switched it off. Can you please assist me with how to overcome this without harming my iPhone? Thanks in advance.
Have you dropped your phone into the water or gotten it wet as a result of a spill? It’s really common, actually. We all know that water-resistant electronics are all the rage right now.
However, there are times that they can be ruined by immersion in a pool or the like. You should know that any gadget is vulnerable to failure if its charging port becomes wet.
Most smartphones today will inform you if a liquid is detected in the charging port. This is true even if you have no idea how the water got there. Your wet smartphone or tablet may be dried out quickly and easily.
So, let’s get right into drying out your charging port after dropping your phone in the toilet.
Is It Possible to Charge the Phone Without Drying It?
Don’t plug your iPhone in to charge if the respective port is still damp. The wires and pins of a computer might become frayed over time. Because of this, the charging port or cable could malfunction.
It’s also possible to receive electric shocks if you try to charge a phone in an unsafe environment. That said, are you worried about what would have happened if you unintentionally charged the phone? If so, you can look up its ingress protection grade (IP rate).
Besides, it is possible to prevent these unsolicited calls on an iPhone. Here, let’s explain how to block no caller ID using several methods here.
What is Ingress Protection?
The phrase “Ingress Protection” is used to describe the level of protection your phone has against environmental hazards. This is specifically applicable to dust and water.
For example, IP68 is a rating with two integers. Protection from solids is indicated by the first digit, while protection from liquids is indicated by the second. The greater the number of people is, the safer everyone will feel.
As such, IP68 is really the best possible certification, as it guarantees complete resistance to dust and fluids. You may rest easy knowing that devices like Galaxy S21 and iPhone 12 have IP68 certification.
However, it is impossible for such devices to keep working after being submerged in water for over 30 minutes.
So, those who wonder how to get water out of the charging port should know this aspect as well.
Also, let’s figure out the reasons behind the ‘My iPhone won’t charge but it says it’s charging‘ error and the top solutions to fix it effortlessly.
Basic Precautions to Protect Your iPhone from Water
If you wonder how to get water out of your charging port, here are some basic yet essential steps. These steps might prevent your device from experiencing further damage.
So, let’s go ahead and learn how to do it.
- Switch off your device as soon as possible.
- Remove all of its accessories as soon as possible. This means chargers, cables, phone cases, etc.
- Make sure that you keep the device upright. Such an arrangement can stop water from spreading further to the circuit.
How to Get Water Out of Your Charging Port – Android and iPhone?
Do you wonder how to get water out of iPhone charging port or even an Android device? If so, the one basic thing you should remember is to wear a pair of gloves.
In addition to that, you should never use sharp devices or objects when repairing the phone. That will definitely end up damaging the sensitive parts of the device.
To proceed, you must shut down the device. Then, tap on the device gently so you can get its excessive water out.
● Removing Moisture
If you wonder how to get water out of the charging port, the first step is to remove its moisture. To do that, you can use a small piece of cotton cloth.
Of course, it must be a clean piece of cloth. After that, you should try to charge the port simply by rubbing that cloth with an inward movement.
Once you have done that, it is possible to leave the device to dry. Just leave the device alone for at least one hour. The more, the better. Never apply pressure on the device when it is wet, as it can worsen the situation.
● Let It Evaporate
Letting the device dry naturally is one of the best options. The port’s water usually evaporates after a couple of hours. Be sure to maintain a vertical phone position throughout this process.
Put your phone somewhere that has plenty of airflow. This is a good solution if you would like to know how to get water out of iPhone charging port.
● Charge It with Your Wireless Charger
Use a wireless charging pad if your device still won’t charge via a cable after trying the aforementioned solutions. However, prior to charging, please ensure that both your phone as well as your wireless charger unit are dry.
Use a wireless charging pad if your device still won’t charge via a cable after trying the aforementioned solutions. However, prior to charging, ensure that both your phone as well as your wireless charger unit are completely dry.
● Contact the Customer Care Team
Didn’t any of the troubleshooting steps above help? And, do you still suspect that its charging port is broken? If so, you can get in touch with customer service.
Samsung users can get in touch with the company via the Support page or by visiting a physical location.
Access the official website of Apple Support. Isn’t the phone still powered on after you’ve tried the solutions above? If that’s the case, please take it to a nearby repair shop.
Common Misconceptions About Drying a Phone
When a phone is in danger of being damaged by water, some individuals may even go for drastic steps.
However, not all deceptions are created equal. The following are some things you shouldn’t do when attempting to dry the faulty phone.
● Exposure to Sun
It’s a popular misconception that leaving your phone out in the direct sunlight can help it die. However, if you leave your phone in the sun for too long, it may malfunction permanently. It can also make your device’s battery becomes too hot.
So, it might cause harm to the phone’s internal components, such as the tiny circuit board. In addition to that, the extreme heat could cause the screen on your phone to shatter.
● Using Dry Rice
If you are looking for how to get water out of your charging port, should you try dry rice? There’re many individuals who suggest that wet phones should be dipped in dry rice to get rid of moisture.
But its efficacy isn’t guaranteed in all situations. Even individual rice grains or specks of dirt can enter the device’s charging port. You can also try placing silica gel packets near the port. If not, any of the other techniques mentioned above.
● Using Cotton Swabs
It is also a good idea to use cotton buds to remove moisture from a phone. However, that is not necessarily the case.
When you rub the bud in the port, some bits of cotton could get inside. There is also a chance that the swab will force the water deeper within.
● Using a Paper Towel
What will happen if you try to dry out a damp charging port with paper towels? If so, you’ll end up with a soggy towel and a soggy port as well.
In that case, tissue fragments lodged in the port will be a pain to remove. This strategy is able to avoid all costs.
● Vacuum Hose
Water can be removed with a vacuum hose. However, its air pressure could damage your phone’s internal parts.
In addition to that, the other liquid grime in the port cannot be removed with vacuum hoses.
● Using a Hair Dryer
The air from a hairdryer is sucked into your device’s charging connector. The water will be forced deeper within, which may be harmful.
Instead, you can merely use it maintaining a very low speed and with the no hot air setting.
● Keeping Your Phone Sitting Idle for Too Long
For several days, if you’re really at a loss for a solution, you may just leave your phone alone. Corrosion, however, is a possible result of this.
Environmental degradation is the gradual deterioration of electrical parts over time. Corrosion on the phone may not show up for a couple of weeks.
What Can You Do if Your iPhone or Android Gives a False Alert for Liquid Detection?
Some users experience false liquid detection alerts even if the phone is completely dry.
That said, please find below the steps to fix such an error.
Disable the Notification
- Go to “Settings” and select “Battery Usage.”
- Go to “Recent Battery Usage.”
- Select “Android System” and then select “Force Stop.”
Perform a Power Cycle
Just switch off the device for a couple of minutes and switch it on once again. That will possibly fix some errors related to notifications.
Update Your Device
Some minor bugs can occur due to outdated system software. All you need is to update the OS so the bugs will be gone.
Use a Different Charging Cable
In some cases, the charging cable itself might be the culprit. In that case, the best fix is to use a new charging cable and see if it works.
Restart the Device to Safe Mode
● For Android Devices
- Shut down the device.
- Press & hold its power button for about 3 seconds.
- Select “Safe Mode” from the popup and tap OK.
● For an iPhone
- Switch off the device and then switch it on again.
- When the screen lights up, hold its volume down so you can see Apple’s logo.
- That will put your iPhone in Safe Mode.
Perform a Factory Reset
● For Android Devices
- Go to “Settings” and select “Backup & Reset.”
- Select “Factory Data Reset.”
- Go to “Reset Device.”
- Select “Erase Everything.”
● For iPhones
- Go to “Settings” and select “General.”
- Then, go to “Transfer/Reset iPhone.”
- Go to “Erase All Content & Settings.”
If none of the above solutions are working, you should reach an authorized service center with your device.
That’s the best solution to try for novices who wonder how to get water out of the charging port.