Are you struggling with the issue of your iPhone 6 stuck in headphone mode? Then, look here for some of the quick and easy fixes. It could be really frustrating when you see an icon of headphones along with the volume slider while headphones are not actually plugged in. In this case, your iPhone would not make any sound even if you push the volume tabs.
Firstly, you can try to put your earphones in and then take them out. If it does not work, you can try to reset your iPhone. On the other hand, if the issue persists, you don’t need to worry about it as you will get solutions in this tech article. The issue of iPhone 6 stuck in headphone mode could be due to problems with hardware and software. In most of cases, this problem arises due to some issues with the headphone jack. So, the issue “iPhone 6 stuck in headphone mode” is generally a hardware problem and not the software one.
Here, you will get to know about the reasons behind your iPhone stuck in headphone mode and how to clean the junk out of the headphone jack of your iPhone and other fixes to resolve the problem.
One of the easiest ways to ensure whether a software hitch is causing the issue “iPhone 6 stuck in headphone mode” or not is to switch your iPhone off and on again. To turn your iPhone off, you need to press and then hold the Sleep or Power button and after that, slide the tab across the screen.
Your iPhone will be turned off within 20 seconds. After that, you need to hold the Sleep button until the logo of Apple appears on your screen. If your device is still jammed with headphone mode after it turns on then, it is not a software problem but a hardware one.
Now, you need to find out about reasons for your iPhone 6 stuck in headphone mode. Mainly, there can be two reasons behind it. The most common problems are listed below:
- Physically damaged headphone jack
- Debris trapped inside the jack
To know about the main reason, you have to grab a torch and glance inside your phone’s headphone jack. If you can clearly see debris stuck inside it, you need to remove it as debris might be making your phone to believe that headphones are plugged in. However, it is extremely difficult to extract anything from the headphone jack.
On the other hand, some Apple techs do not even try this as it permanently damages the headphone jack. However, you can give it a try if you want to.
How to dig up junk out of the headphone jack?
Unfortunately, Apple stores do not have any special tools to remove debris from iPhone’s headphone jack. So, there is actually no correct way to perform this task. On the other hand, there are some tricks that you can use to extract stuff out. These tricks will effectively help you, but Apple does not approve these methods in any sort. You need to be extra careful as these methods can even damage your phone’s headphone jack.
In order to remove debris from the headphone jack, you can use this amazing yet successful pen trick. For this, you need to take the help of a pen. Next, follow some simple instructions as listed below:
Step 1: Take a pen
Initially, you have to take a BIC standard pen and then remove its cap.
Step 2: Take off its tip
Next, you need to pull its tip-off from the pen’s plastic body with the help of pliers.
Step 3: Use the tip
After that, you will notice that the pen’s tip is fixed to a plastic carriage that encloses the ink.
Step 4: Take the contrary end
Next, you have to take the contrary end of the plastic cartridge as it is of the perfect dimension to eradicate stuff from your phone’s headphone jack.
Step 5: Put that end into the jack
Now, you need to put that contrary end into your iPhone’s headphone jack while twisting it gently to unfasten the debris. After that, take it out of your device.
In this way, you can take out debris from the headphone jack successfully. However, do not press it too firm if the stuff is not coming out and move to the second trick.
You can take the help of ultra-thin tweezers to reach far inside into an iPhone’s jack to pick out debris like rice. It will help you to remove debris, but it is really a tough task. It can easily damage the sides of your iPhone’s headphone jack if you thrust it too far.
Compressed Air is another method that you can use to remove debris from the headphone jack. For this, you need to take the help of a canister of compressed air to blow air into the headphone jack. In this way, debris will loosen up enough that you can shake it completely out.
However, try to be gentle and do not stick the hosepipe into your phone’s headphone jack to start blowing directly. You need to begin from the outer surface and then work all the way in. On the other hand, if you do not have a compressed air’s can, you may puff it out yourself. Meanwhile, it would not be an effective way as our breath comprises moisture, which can damage the internal circuit of iPhones.
Disassemble the device
This method is not for everyone as only technicians can perform this task. Here, you have to disassemble your iPhone in order to poke out debris from underneath the headphone jack. To remove debris in this way, you can look for videos that show excellent guides for the same. However, it is recommended not to perform this extremely difficult task.
If you are still facing the issue “iPhone 6 stuck in headphone mode” after trying the tricks mentioned above, your device needs to be fixed. Some of the most common reasons behind not working of the headphone jack of iPhones are listed below:
One of the most common reasons behind the issue “iPhone 6 stuck in headphone mode” is the damage caused by water. Most of the time, people do not have any idea how it happened. As you know, the headphone jack is the only opening of your iPhone, which makes it vulnerable to water damage. If you work out or run while listening to music on your iPhone, it may be possible that sweat trickles down your headphones’ cord to the jack.
It can even happen to other kinds of damages caused by water. It is highly possible that your iPhone works absolutely perfectly after getting wet but not the headphone jack.
The issue “iPhone 6 stuck in headphone mode” could be due to physical damage. If your phone is in one piece after smashing down on the floor, it is possible that the problem of headphones stuck mode arose at that time. It happens because the headphone jack gets dragged off from the device’s logic board.
On the other hand, plugging your headphones out and in of the device does not cause this issue. It never occurs due to the normal use of headphones. The other reason could be wrapping up of headphones all-around your device when not in use. It causes stress on the end of headphones plugged into the jack so immense that the whole headphone jack begins to drag off from the device’s logic board.
So, if you have a habit of wrapping up your headphones all around your phone, it is recommended to unplug them from the headphone jack when you wrap them around.
In case you could not bring your iPhone back to normal using the above-mentioned tricks, you need to get your device repaired. This issue of “iPhone 6 stuck in headphone mode” is really frustrating for those who visit Apple stores and could not find any solution except to substitute the entire device. So, it makes people use Bluetooth headphones to make or receive calls. It causes a major nuisance as the sound system does not work at all on your device. It is better to go for Puls to resolve this issue at your home within a few minutes. Puls give a lifetime guarantee on devices’ components and labor.
Now, you make out what all you have to do to resolve the issue “iPhone stuck in headphone mode“. You can try all these tricks to get rid of this problem. With the help of these methods, your iPhone will no longer remain stuck on the headphone mode. Now, you don’t need to worry about this issue as you know what you have to do subsequently.